Maximize Savings with a 10kW Solar System in Sydney
In Sydney, where beautiful sky and abundant sunlight are almost a way of life, solar power has become a cornerstone of sustainable living and energy independence. Among the several options available, the 10kW solar system stands out as a powerful solution for converting rooftops into clean, renewable energy sources.
As Australia continues to embrace the move to a greener future, the attractiveness of solar energy becomes increasingly apparent. Solar power has gone from a specialist interest to a mainstream necessity, thanks to its ability to cut both carbon footprints and energy expenses. This is especially noticeable in Sydney.
Why Should You Invest in a 10KW Solar System?
It is important to know your average daily electricity consumption to analyze whether 10kw is enough for you. If your daily power consumption is between 32 – 40 kwh, then you must go with a 10 kw system. Because it is ideal for homes or businesses that use 40kwh of electricity per day during daylight hours. A 10kW system will generate the same amount of electricity daily and also allow you to increase your daily electricity usage if needed.
One crucial point to remember is that all heavy equipment should not be run at the same time, and the time used to operate this equipment should be divided so that the electricity generated may meet all of your needs.
While 5kw and 6.6kw systems are common in Sydney, the 10kw system is also growing in popularity. This system is ideal for homes or businesses with an average daily electricity consumption of 40 kWh.
Can I install a 10kw solar system in single phase?
In Sydney, NSW, a single-phase connection is allowed to have a solar system sized up to 6.5 kW, and a three-phase connection is allowed to install a solar system sized up to 30 kW. Most businesses have a three-phase connection, but in terms of houses, a single-phase connection is common in Sydney. But many houses have a three-phase connection. So a 10 kw system is allowed for those houses that have a three-phase power connection.
How many panels for a 10kw solar system?
A 10kW solar system is one of the largest solar PV systems available for domestic use and is ideal for large houses and home offices. Here’s what you should know before you buy one. This solar system is usually set with 23pcs of 440w solar panels (27 PCs X370w) =9.990 kW known as 10 kW, just short of 0.01 kW. Another format of a 10 kW Solar system usually consists of 28 panels. To be more specific a 10 kW solar system requires 28 panels if each panel is 370w. So, the calculation is: 28 X 370W = 10360 watts.
How much does a 10kW solar panel system cost in Sydney?
Generally, to install a 10kw solar panel you have to spend about $4500 to $7000 in Sydney. The price or cost of the 10kw Solar system varies depending on the quality of the equipment.
If you want to get your 10kw Solar System of good quality installed by professionals or a renowned solar company in Sydney, you have to spend about $10000.
But as of January 2022, the average cost of a 10kw Solar panel in Sydney is $0.70per Watt or $7000 after rebate. The package consists of Panels, roof mounting, and an electrical kit. Prices are subject to change at any time please call us (1300 131989) or send a message for today’s best price.
How much roof space is required for a 10kw Solar System?
Typically, 600 square feet of roof space is required to install a 10 kW solar system. But it depends mainly on panel size and wattage.
Since a 10 kW solar system consists of 28 panels it will occupy an area of 51.338 square meters. Visit for sizes and dimensions.
If it needs 34 panels it will need 54.4 square meters of roof space as typically, each panel is about 1.6m x 1m.
If a tilting frame is required it will require more space.
How Much energy can be generated by this system?
The amount of energy generation by a 10kw Solar system depends on:
- Location of the House
- Position of the Panels
- Local climate
- Sunlight peak hour
- Angel of the panels.
- Position of the system
- Shade casting
- Quality of the panels
- Individual performance of battery, inverter, and panels.
Depending on the above factors a 10kw Solar System produces 35-40kw energy per day in Sydney.
Australia’s Capital cities wise Solar Energy chart :
| 10kW solar system output by capital city (per day) | |
| Adelaide | 36 – 41 kWh |
| Brisbane | 39 – 41 kWh |
| Canberra | 36 – 41 kWh |
| Darwin | 42 – 46 kWh |
| Hobart | 29 – 33 kWh |
| Melbourne | 31 – 36 kWh |
| Perth | 40 – 44 kWh |
| Sydney | 35 – 40 kWh |
This system produces enough power for a big house if the bill is above $600 per quarter.
It is also said that 40kw per day is enough to run 2-3 houses in Sydney. That means it produces approximately 12000 kilowatt-hours a year.
But the power generation changes with the season. Solar panels generate more energy in summer while solar panels generate less energy in winter than in summer.
Savings or Benefits from a 10 KW Solar system:
There are several types of savings or benefits that can be obtained from a 10kw solar system: :
- Self-Consuming: This is the primary benefit of having a 10kw Solar System. Use as much energy as needed from the generated power by the 10kw solar system directly and reduce your electricity bill up to 80% per quarter.
- Feed-in tariff: This can be said the Secondary benefit of having a 10kw Solar system on the roof. After self-consumption, the excess power will go to the electric grid. Though the feed-in tariff price is lower than the price we pay for direct electricity. In Sydney, the Feed-in tariff price is 20 cents per kilowatt-hour. So with the above factors if we consider the below scenario, then the payback would be as such
- In the 1st scenario: If you use all the power generated by your 10 kW solar system, then you would likely save approximately $5000 in the first year.
- In the 2nd scenario: If you use 50% of the electricity and feed-in tariff the rest, then you would save approximately $2500 in the first year.
- In the 3rd scenario: If you feed all the energy generated by your 10kw solar system into the tariff, you will save about $1200 in the first year.
So, you should use more solar power to save more money or get more benefits from your 10kw solar system.
The payback time of the 10kw Solar System:
The payback period depends on how much power is generated by the system and the generation of power depends on the location, climate, panel size, consumption of power, inverter performance, and roof layout.
If someone uses more than 30/kWh per day, then the payback period most likely would be 6 to 7 years.
One can make more than $70000 within 25 years of system life.
If you are using all the electricity on-site then a 10kW will have paid for itself in under i5 years, assuming you pay 30c for your electricity from the grid and electricity prices rise at 5% per year. After that the electricity is free apart from a small maintenance cost (expect to pay $500-$700 every 5 years) and a replacement inverter every 15-20 years.
Battery Backup with the System:
It is really great that a 10kw solar system can add battery backup. The battery backup allows using solar energy both day and night. It can be connected with any compliances or electric property of your house to absorb the power directly. But it can prolong the backup period as it costs a little higher.
It will cost you $10000 to $12000 for the package of 10kw Solar System with a battery backup. The price is not so low I must say.
Usual grid-connected solar is made to export excess electricity on its own, but while connected to the battery it is not able to do so.
Moreover, while one can use a 10kw solar system for 25 years without replacing, (with a low maintenance cost) the battery would need a replacement after 10 years. This is not an advantage.
What size inverter for 10kw solar system?
For a 10 kW solar system, the ideal size of the inverter would be 8.2 kW, because according to the rule, one can have a solar system oversized by 133% in Australia. You can also use a 10 kW inverter, but an 8.2 kW inverter would be more appropriate because
- It produces more power.
- Easy to get connected with the electrical grid.
- It certainly saves money to install a system with a panel capacity bigger than inverter capacity.
- Inverter determines the maximum panel capacity
The 10 kW solar system also needs a three-phase connection. It would be costly to install a 10 kW solar system with a single-phase connection because additional changes need to be done
Another important implication of size limitations is solar feed-in tariff eligibility. iSystems over a certain size may be approved for installation, but not for exporting energy to the grid, which means no solar feed-in tariff benefit. This in turn means that the household in question should do everything they can to self-consume as much solar energy as possible to ensure that none of it is wasted. Sometimes, the feed-in tariff limit is set by your electricity retailer into the network.
Another perfect size for high energy-consuming houses and businesses with small needs is a 15 kW Solar system. It occupies more space on the roof as it consists of 37 to 40 panels depending on the capacity of each panel.
It will cost around $9400 to get the whole 15 kW solar system in Sydney.
Solar World Power offers a lower price for the package.
FAQ.
Yes, you can install a 10kW solar system on a single-phase home. Single-phase inverters are acceptable for up to 10kW solar system.
Yes, an air Conditioner can run with a 10kW solar System. Pv system AC can be a great way to save the environment and your money.
How to get the system:
First of all, before jumping to buy it you should have market research. Compare the prices. It is easy to get price quotations for solar systems from our company. We provide online quotes through email. You can also call us and ask for the price quotation. We should send you an email with the price quoted. Thus, you can compare the prices and also the quality; I would suggest you go with the quality even with a high price if there is no budget issue. After you have intended to buy the solar system, you just need to call us or message us and provide your details. It will take a max of 2 to 3 days to come to your place and work of 5 to 6 hours to install the system on your roof.
We are dedicated, passionate, and committed to renewable energy, and eager to contribute our share to better the environment.
Get a Quote